Testimonials from Byonics Customers
If you have been impressed with Byonics products or service, please share your comments here.
If you were not completely satisfied with your Byonics experience, please let us know!
Diego - IV3WSV (2008-06-29)
TT4 is Fantastic! Too easy to build, I've build it in less than 2 hours.
I will try iy next week during a cicles competition.
Great BIG BYON!!!!!!! Thanks for all
Daniel - VA7DRM (2008-06-15)
I can not keep from telling people how great the TT4 is!
I just tried the LCD firmware and it works great! Can't wait until a keyboard is added! Thanks again Byon.
Keith Howell - G4YKE (2008-06-10)
We bought 2 TinyTrak4s for our RAYNET (emergency communications) group. These units are to be built into cases for quick installation into non-RAYNET vehicles eg ambulances. The kits arrived promptly and were complete and easy to assemble. They both worked first time. We're very pleased to see the latest firmware includes digipeating. The 'burst after PTT' feature is going to be very useful to enable us to use APRS and voice traffic on the same frequency. Keep up the good work Byon!!
Robert Kunze - DD5AN (2008-06-01)
Hi purchased a TinyTrak3+ and for mobile APRS and a TinyTrak 4 to use new functions. Both traks are working very well. Now i hae load the new TinyTrak4 display firmware on the tinytrak4 and it works fine. I´m waiting for new features in the tinytrak4. Many thanks for this APRS solutions.
Tim Messer - W9TAM (2008-05-20)
I purchased a TinyTrak3 for mobile APRS use shortly after getting my ticket in 2004. Byon's setup instructions were easy to understand and follow; the TT3 worked great on a cross-country road trip. Since then, I have purchased additional products (including a TT3+, GPS and cables) and have recommended Byonics in any conversation where APRS has come up. Thanks for providing inexpensive, simple APRS solutions with great products and service!
Harley Burton - N5BFB (2008-05-13)
I purchased a TinyTrak3 and combined it with my very old Wilson MkIV, a homebuilt 10W Power Amplifier and an old Rockwell Jupiter GPS. It works fantastic. My only problems were not enough transmit power till I put the amplifier on it. It is a homebuilt piece of stuff. A 2N6082 pulled out of an old radio. It's an old design but it works.
Bill - N6SGX (2008-05-07)
I must say, Thought it woud be a big effort. I was wrong. The TT3 works well on my wifes car (KG6KXM) and the Microtrac on my Harley is performing very well. I still have one more call sign in the home and his car will also have TT3 soon. It was a pleasure working with Byon and I look forward to our future dealings. Hope to meet up with you when I ride to Vegas. You can see me & my installation at
Check it out and I highly recomend this product.
AEK.PK - HS8GLJ (2008-04-28)
TinyTrak3 Very Good
Daniel - VA7DRM (2008-04-27)
I just got my next TinyTrak4, I had it assembled and running in 30min! Works great! I like it better then a KPC-3+ Because you can upgrade the firmware for FREE. I am always checking for new firmware!
Ray Wells - VK2TV (2008-04-23)
Excellent pre-despatch service and advice, and just five days delivery to Ausralia.
The kit and instructions look great.
Byon certainly knows what customer service means.
Chris - KD4AHM (2008-04-21)
Byonics kits rock! So easy to build. Documentation is excellent. Solid performers. Just built the PicCon for a foxhunt- Love it! My TT3 has been on the air for 3+ years- no problems. Can't wait to build the next kit!
Daniel - VA7DRM (2008-04-20)
I will rate this as five stars! I just got one of the TinyTrak4, from the very first time I saw the TT4 I knew it was worth the money! and the more I use It the more I like it, Like I just found out about the waypoint out put for my Garmin 3+ What that means is that you can see your friend on the screen of your GPS!
I Look forward to when they make a Micro-Trak 400 using the TT4. I like it so much I am going to get one more!
Matt - KE6ALM (2008-04-14)
I use TinyTrak 3's for APRS support during race events. The kits are easy to assemble and set up, and if you follow the directions carefully, will probably work on the first try. The configuration software could use a little improvement, but it is functional (I always manually read the data out of the chip after I program it to make sure it's right; I've had some bad programming happen). I definitely recommend Byon's products, good bang for the buck!
robert fitzpatrick (bob) - kb5sqg (2008-04-14)
rec my micro-trak in 2 days ,i hooked it up with NO PROBLEMS , WAS ON THE AIR IN ABOUT 1HR . WORKS GREAT PLAND TO BUY A TINY TRAK 4
I HAPPY CUSTOMER
TRACKING MY NEW TRUCK
Andy - IK2HNG (2008-04-14)
Great! It was easy to build and i was online at my first attempt!
Glen - K5GED (2008-04-13)
I bought the TT3 to use with my IC2-AT and later got the PocketTracker which makes a compact package with my Garmin eTrex. Very few problems, and Byon straightened them out lickity-split (that's fast in Southern). I use them mostly when flying my Powered Parachute (better than ADS-B !! ) 73- Fly Safe
Andrew - KE5GDB (2008-04-11)
Well, I bought my TT3+ (TinyTrak3+), and I've been enjoying it since I bought it. I had a little issues at first, but they were all my fault (dead batteries). I am very impressed with it, and I'd recommend it to anybody who asked. Don't hesitate to buy one.
Stephan - la7coa (2008-03-27)
TT3+ is WORKING!!There is many systems on the marked today,if you whant PnP go for byonics systems!!this is a greate system and im using on yaesu vx7,8900 and 857
GENE - W7RMC (2008-03-23)
YOUR PRODUCTS ARE GREAT, I USE THE TINY TRACK 3 WITH ALL OF YOUR CABLES. IT MAKES IT EASY TO USE.
Stew - AE5AI (2008-03-21)
Ordered Tinytrak4. Using it with VX-3R and GPS 18 OEM. Works finer than a frog hair split 3 ways. Great kit to build.