MicroTrak AIO

The MicroTrak AIO (All In One) is a complete, self-contained, rugged, water resistant, portable, 10-watt APRS tracker, including a frequency agile 2-meter transmitter, a TinyTrak3 controller chip, a Byonics GPS5OEM receiver, and an SMA antenna. The MT-AIO was designed for ease of use. It comes pre-configured with your callsign, so you simply connect the antenna, install 8 AA batteries, and you are on the air! The MT-AIO has been confirmed to run nearly 8 days when used with typical AA alkaline batteries, transmitting every 2 minutes. It weighs only 14 oz without batteries, and is available with your choice of our V2 Rubber Duck Portable antenna, or our V3 Mag Mount Vehicle antenna.

After you place the order, please use the order notes or an email to send us your callsign and any other custom operating parameters. If we do not receive this information, we will hold your order, and contact you via email before shipping. Even though it does ship pre-configured, users can easily update all settings by downloading the configuration program and using a USB-2.5 or DB9-2.5 cable. These products operates on amateur radio frequencies, and requires a valid amateur radio license to use. Since it is a transmitter only, it may ocassionally send very short packets coincidentally with other transmitters.

DownloadMT-AIO User Manual - v3.2
DownloadTinyTrak3 Configuration Software - Windows programing software. Version 1.4.6

Add To CartMicroTrak AIO w/ V2 - $260
Includes MT-AIO and V2 rubber duck antenna

Add To CartMicroTrak AIO w/ V3 - $260
Includes MT-AIO and V3 mini mag mount antenna

Add To CartMicroTrak AIO HA - $320
A high altitude ballooning version of the MT-AIO. Includes GPS5HAOEM high altitude GPS module and our V6 dipole antenna. The recommended path for balloons is WIDE2-1. Weight is 13.7oz not counting batteries.

MicroTrak AIO-B

Our new MT-AIO-B portable tracker is similar to the MT-AIO above, but in a smaller case and sending 5-6 watts. It includes the V4 rubber duck antenna and everything needed to operate except 6 AA batteries. It comes pre-configured, but to make changes, use the TT USB cable (not included), rather the 2.5mm cables.

DownloadMT-AIO-B V1 User Manual - v0.2

Add To CartMicroTrak AIO-B w/ V4 - $260
Includes MT-AIO-B and V4 rubber duck antenna

Back Additional MicroTrak Products