|
|
|
|
Kenwood D700A and D7A Cables
Kenwood D700A / D7A to Computer Serial CableThis 3-foot cable will connect a Kenwood D700A or D7A APRS radio to a computer serial port via the 3/32" stereo GPS or PC jack. It has a female DB-9 connector to plug into a computer serial port. It can also be used as a programming cable for PocketTrackers. It is available with a straight 3/32" plug, or a right angle 3/32" plug. Wiring is DB-9 pin 5 to 3/32" shield, pin 3 to ring, and pin 2 to tip. 
Kenwood D700A/D7A Serial Cable (Straight) - $15.
Kenwood D700A/D7A Serial Cable (Right Angle) - $15.
Kenwood D700A / D7A to GPS Adapter CableThis 3-foot cable will connect a Kenwood D700A or D7A APRS radio to any GPS cable that normally plugs into a computer serial port. It has a male DB-9 connector and a right angle 3/32" stereo plug for the Kenwood GPS or PC jack. It can also be used as a GPS adapter cable for PocketTrackers. Wiring is DB-9 pin 5 to 3/32" shield, pin 2 to ring, and pin 3 to tip.
Kenwood D700A/D7A GPS Adapter Cable - $15.
While these cables have been confirmed to work on the radios listed, you must use them at your own risk. Byonics is not responsible for damage resulting from these cables. See More Byonics Cables |