Byonics
Byonics
TinyTrak3
TinyTrak4
Cables
   •TinyTrak3
      •HT
      •Modular
      •Round
      •Mini DIN
   •GPS
   •Byonics GPS
   •Deluo
   •Powerwerx
   •Garmin
   •D710A
   •USB
   •Null Modem
Micro-Trak
GPSs
PocketTracker
PocketFox
WXTrak
TinyPack
PicCon
TDOA
APO3
PICPAC
GST-1
Downloads
Links
Testimonials View Cart Contact
Home

Find us on Facebook
TinyTrak3/4 Radio / Power Cables


Byonics TinyTrak3/4 Radio / Power Cables will connect a TinyTrak4, TinyTrak3+, WXTrak or PicCon to most modern transceivers. These 18-inch cables connect to the microphone and earphone/speaker jack of the radio, and also connect to the power supply, either via a cigarette lighter plug, an Anderson Power Pole connector, or the radio microphone jack.

Since there are so many different radio transmitters that can be interfaced to the TinyTrak3 or TinyTrak4, not all radios will be supported. If your radio is not currently listed, please contact Byonics and request we add support for your radio. Additional cable types will be created as we see which ones people need. Some cables may be compatible with radios not listed. If it looks like a cable may work with your radio, you can order one to try it. If it works, please let us know and we will add the radio to the supported list. If it doesn't work, you can return it for a full refund.

While these cables have been confirmed to work on the radios listed, you must use them at your own risk. Byonics is not responsible for damage resulting from these cables.
NEW!! View the Byonics Radio/Power Cable Chart to help select to proper cables.
HT (handheld) Cables
HT1 - For Yaesu, ADI, and Radio Shack handheld radios with a 1/8" mono earphone jack and a 3/32" mono mic jack.
HT2 - For Icom handheld radios with a 1/8" stereo earphone jack and a 3/32" stereo mic jack.
HT4 - For Yaesu handheld radios with a single four-conductor 1/8" earphone / mic jack.
HTK - For Kenwood handheld radios with a 3/32" mono earphone jack and a 1/8" stereo mic jack.
HTB - For Baofeng UV-3R handheld radios with a single four-conductor 1/8" earphone / mic jack.

Mobile Rig Cables with Modular Rectangular Microphone Jacks
M2 - For Kenwood mobile radios with an 8-pin RJ-45 modular mic jack with squelched audio out.
M4 - For Kenwood mobile radios with an 8-pin RJ-45 modular mic jack and an 1/8" speaker jack.
M5 - For Yaesu mobile radios with an 6-pin RJ-11 modular mic jack and an 1/8" speaker jack.
M6 - For Icom mobile radios with an 8-pin RJ-45 modular mic jack and an 1/8" speaker jack.
M7 - For Radio Shack mobile radios with an 8-pin RJ-45 modular mic jack and an 1/8" speaker jack.
M8 - For Yaesu mobile radios with an 8-pin RJ-45 modular mic jack and an 1/8" speaker jack.

Mobile Rig Cables with Round Microphone Jacks
R1 - For Kenwood and Alinco mobile radios with an 8-pin round mic jack jack and a 1/8" speaker jack.
R2 - For Yaesu mobile radios with an 8-pin round mic jack jack and a 1/8" speaker jack.
R3 - For Icom mobile radios with an 8-pin round mic jack jack and a 1/8" speaker jack.
R4 - For Radio Shack mobile radios with an 8-pin round mic jack jack and a 1/8" speaker jack.

Mobile Rig Cables with 6-Pin Mini DIN Data Jacks
M1 - For mobile radios with a 6 pin mini DIN data jack. Uses the Carrier detect line of that connector.
M3 - For mobile radios with a 6 pin mini DIN data jack and an 1/8" speaker jack.
M12 - For mobile radios with a 6 pin mini DIN data jack. TinyTrak4 Only.
M96 - For mobile radios with a 6 pin mini DIN data jack. TinyTrak4 Only.


While these cables have been confirmed to work on the radios listed, you must use them at your own risk. Byonics is not responsible for damage resulting from these cables.
See More Byonics Cables