|
|
|
|
TinyTrak3 to Modular Mic Mobile Rig Cables
M2C / M2P / M2S - For Kenwood Mobile Radios with an 8-pin RJ-45 Modular Mic Jack with Squelched AudioKenwood TM-733 This 18-inch cable will connect a TinyTrak3 to Kenwood Mobile radios with a 8 conductor RJ-45 microphone jack. The radio must have squelched audio on this jack. If the radio does not have squelched audio on this jack, use an M4 cable below. R8 should NOT be included on the TinyTrak PCB to use this cable. This cable is available with a cigarette lighter plug, an Anderson Powerpole, or powered from the radio mic jack. Do NOT attempt to power a GPS from the TinyTrak3 when using this S version cable unless the mic jack can handle the current. 
M2C - $19.
With a fused cigarette lighter plug. Wiring Diagram
M2P - $19.
With an unfused Powerpole connector. Wiring Diagram See Fuse Notes below.
M2S - $19.
Powered from the radio mic jack. Wiring Diagram
M4C / M4P / M4S - For Kenwood Mobile Radios with an 8-pin RJ-45 Modular Mic Jack and 1/8" Speaker JackKenwood TM-733 This 18-inch cable will connect a TinyTrak3 to Kenwood Mobile radios with a 8 conductor RJ-45 microphone jack. R8 should NOT be included on the TinyTrak PCB to use this cable. This cable is available with a cigarette lighter plug, an Anderson Powerpole, or powered from the radio mic jack. Do NOT attempt to power a GPS from the TinyTrak3 when using this S version cable unless the mic jack can handle the current. Sorry, M4C and M4P cables out of stock until July. Wiring Diagram
M4S - $19.
Powered from the radio mic jack. Wiring Diagram
M5C / M5P - For Yaesu Mobile Radios with an 6-pin RJ-11 Modular Mic Jack and 1/8" Speaker JackYaesu FT-90 This 18-inch cable will connect a TinyTrak3 to Yaesu Mobile radios with a 6 conductor RJ-11 microphone jack. R8 should NOT be included on the TinyTrak PCB to use this cable. This cable is available with a cigarette lighter plug or an Anderson Powerpole. Sorry, M5C and M5P cables out of stock until July. Wiring Diagram
M6C / M6P / M6S - For Icom Mobile Radios with an 8-pin RJ-45 Modular Mic Jack and 1/8" Speaker JackIcom IC-706 This 18-inch cable will connect a TinyTrak3 to Icom Mobile radios with a 8 conductor RJ-45 microphone jack. R8 should NOT be included on the TinyTrak PCB to use this cable. This cable is available with a cigarette lighter plug or an Anderson Powerpole. Do NOT attempt to power a GPS from the TinyTrak3 when using this S version cable unless the mic jack can handle the current.
M6C - $19.
With a fused cigarette lighter plug. Wiring Diagram
M6P - $19.
With an unfused Powerpole connector. Wiring Diagram See Fuse Notes below.
M6S - $19.
Powered from the radio mic jack. Wiring DiagramFuse Notes
The Powerpole cables do not include fuses. These should only be plugged into a fused power supply. In-line fuses can be purchased from
PowerWerx.
While these cables have been confirmed to work on the radios listed, you must use them at your own risk. Byonics is not responsible for damage resulting from these cables. See More Byonics Cables |